Table of Contents
Advertisement
11. Web UI (RoomView Connected projectors only)
Web UI is a tool to control and monitor the projector using a Web browser.
For some projectors, you have to change a setting in projector menu to enable this function.
11.1. Main functions
• Projector control (You can control the projector using the computer screen.)
• Projector status display (projector name, lamp mode, lamp operation time, error/warning, etc.)
11.2. Starting Web UI
(1) Enter the projector's IP address (e.g. http://192.168.0.30) in the address bar of the browser and
then press the Enter key.
<Note>
• You can connect only one Web UI to one projector.
Control screen
You can perform the following controls by clicking the buttons and tabs displayed on the screen.
Power:
AV Mute:
Vol +/-:
Source List:
Freeze:
Contrast:
Brightness:
Color:
Sharpness:
Magnify:
,
:
Turns on or off the power.
Mutes the video and audio temporarily. Clicking this button again will disable
the mute.
Adjusts the audio volume.
The source you click is displayed. To see hidden sources, click
scroll the list.
Pauses the displayed video. Clicking this button again will resume the normal
video display.
Adjusts the contrast of the video.
Adjusts the brightness of the video.
Adjusts the color density of the video.
Adjusts the sharpness of the video.
Magnifies some part of the image. Clicking the
image without changing the projection size. Clicking the
out the area that has been magnified by the
area to be magnified by pressing the
Scroll the button bar to display hidden buttons.
EN-25
button will zoom in the
button will zoom
button. You can select the
,
,
or
button.
or
to
Advertisement
Table of Contents
