Table of Contents
Advertisement
6.1.1
Playing back audio data
You can play back audio data contained in the copied data using the following procedure.
[Not Synchro. playback]
Put a checkmark to [Output] on the FSMPlayer panel and select a playback channel from the drop-down menu.
Then select [Not Synchro.] in the [Playback] field. Play back the copied data and stop at a point where you want to
hear the audio. The audio data around the stop point are played back. You can change the duration of audio
playback in 3 levels using the slide bar on the right side. The actual duration of audio playback varies depending
on the frame rate of the recorded image. Adjust the duration for every data to be played back.
[Synchro. playback] (Available only in DX-TL5000 series.)
Select [Synchro.] in the [Playback] field. You can play back simultaneously the audio and image of the data
downloaded in blocks via network or the data copied together with audio by a recorder. Only one playback channel
is displayed in this case. Audio will not be played back during other than normal playback (such as fast-forward
playback and reverse playback). The [LipSync] slide bar should be adjusted according to the PC to be used and
the recording status of data to be played back. In some cases, there may not be found an optimum position where
the image and audio synchronize with each other.
Notice
• Some items are not displayed or operated depending on the type of recorder used for recording.
• In Synchro. audio playback, the frequency of image refreshing is reduced depending on the processing power
of PC. When you want to playback giving priority to image, select [Not synchro.].
• The settings on this panel remain intact for the next startup.
• Audio playback channel and image display channel are not related. You can play back them in any combination.
• When data are played directly from a drive that is slow to read CD and DVD, audio may be output intermittently.
Play back data after copying it to a HDD.
6.1.2
Adding a bookmark to copied data
Click [Save with the bookmark] in the [Bookmark] menu. You can register the point currently played back as a
bookmark. By clicking [A] and [B] in the [Bookmark] menu, you can register the points being played back as points
A and B for A-B repeat playback. For A-B repeat playback, put a checkmark to [Repeat between A and B] in the
[Bookmark] menu. Bookmarks are retained by this software.
6.1.3
Changing the size of the copied data playback windows
To change the size of the camera windows, use the [Picture Size] command in the [View] menu. This command
takes effect over all the camera windows. To change the size of one camera window alone, select the camera
window by right-clicking on its image display area and use the [Picture Size] command in the [View] menu.
Alternatively, you can change the size of the window arbitrarily by dragging its edge.
6.1.4
Changing the picture quality applied in playback of copied data
To change the picture quality, use the [Decode Level] command in the [View] menu. Use this function to give
priority to playback speed over the picture quality when you play back copied data on a PC having insufficient
capacity. This command takes effect over all the camera windows. To change the picture quality of one camera
window alone, select the camera window by right-clicking on its image display area and use the [Decode Level]
command in the [View] menu.
– 43 –
Advertisement
Table of Contents
