NEC Storage Manager Messages Handbook page 370

iSM14430: Set LD reserve ( ): LDN=<aaaa>h,
status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that the Reserve Pool attribute was set.
aaaa
bbb...b
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14431: Cancel LD reserve ( ): LDN=<aaaa>h,
status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that the Reserve Pool attribute was canceled.
aaaa
bbb...b
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
: Logical disk number
: Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
: Logical disk number
: Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
365
Chapter 2 Message List