NEC Storage Manager Messages Handbook page 157

Chapter 2 Message List
iSM08054: Threshold excess state has been
[Classification]
[Explanation]
[Measures]
iSM08055: Saving of threshold monitoring
[Classification]
[Explanation]
[Measures]
reset([disk array=<aaa...a>][,
type=<bbbb>][, number=<cccc>][ :
<dddddddd>])
NOTICE
Threshold excess status has been released automatically.
aaa...a : Disk array name
bbbb : Calculation unit
PORT : Port
LD : Logical Disk
PD : Physical Disk
cccc : Component ID number
dddddddd : Monitoring item
iops : I/O Density
rate : Transfer Rate
avlen : Average Transfer Length
avresp : Average Response Time
readhit : Read Hit Ratio
writehit : Write Hit Ratio
busy : Busy Ratio
Unnecessary
object failed ([disk array=<aaa...a>]
[func=<bbb...b>] [errno=<cccc>]
[detcode=<dddddddd>])
WARNING
It indicates that storing of threshold value failed.
aaa...a : Disk array name
bbb...b : Name of function in which an error occurred.
cccc : Error number
dddddddd : Detail code
Disk space shortage and file system failure are suspected. Remove a cause of
error and restart NEC Storage Manager server. Then, specify a threshold on the
performance monitor screen again.
152