Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
Push buttons / Keypad on the Control Panel (CP)
Key/push button
P6
Fault acknowledge
(yellow)
P7
Paper feed (white)
P8
Access (white)
P9
Return (white)
1 – 9 and 0
C
A
Operation/function
Used to acknowledge the faults shown in menu H6. Also used
to acknowledge SERVICE signal, see menu H8/S1.
Not used in EBL128.
Used to log on, i.e. to get access to the menu tree (via an access
code) to carry out disablements, etc. In conjunction with a fire
alarm, some information is available and some actions are
possible to perform via the "Fire alarm menu" (X1-X9) without
log on, see chapter "Fire alarm", page 39.
Used to stop input of data, leave a menu ("one step up") and to
log off.
Numeric keys for the figures 0-9.
Used to clear /delete just written data.
Used to accept a menu and accept input of data.
Left / right keys are used to move the cursor in a menu.
Up / down keys are used to scroll between the menus.
18
In the New Zealand convention only, used to acknowledge a Fire alarm,
i.e. the alarm information "ALM" in the LCD is changed to "ACK".
19
EBL128 Operating Instructions V1.1.x
18