Side Panel Controls - Hitachi 42V515 Operating Manual

Lcd rear projection tv
Hide thumbs Also See for 42V515:
Table of Contents

Advertisement

SIDE PANEL CONTROLS
®POWE..,g..
This light is on during normal operation,
Light BlinkingSlowly (2 seconds): television lamp is coolingdown. It takes 12-15 seconds to warm up and about 2 minutes to cool
down.
ii iiiii ¸i
m
i _!!ii!!in"!
NOTES:
1.
INDICATOR
LAMP LED
TEMP
LED
INDICATION
ACTION
LIGHT ON
BLINKING
MEANING
NO LAMP LIGHT
or BROKEN LAMP
LIGHT ON
BLINKING
LIGHT ON
FAST BLINKING
SLOW BLINKING
WRONG LAMP UNIT
ASSEMBLY/LAMP
DOOR OPEN
Too hot inside the
OPTIC unit
COOLING FAN STOPPED
NORMAL
OPERATION
POWER
1. -5 secs.
COOL DOWN
2. 5~15 secs.
COOL DOWN
3.15-20
secs.
Need to replace if
LAMP still does not light by
"Power On" again.
Check assembly condition of
LAMP UNIT
Call for Service
.amp is still on. Power ON is available.
_amp is off. Power ON is not available.
.amp is off. Power ON is available.
2. If the LAMP, TEMP, and POWER LED are blinking in the order below, the television is warming up.
POWER --_TEMP--b LAMP
+
I
3.
Your Hitachi LCD Rear Projection Television may appear to be OFF when it is set to input 1 - input 5 and the video
signal is not received from the inputjacks. Please make sure the Blue Power light indicatoris not llt (OFF) when
you are not watching for long lasting performance.
4.
Your Hitachi LCD Rear Projection Television has an intemal lamp that lights up the TV screen. Make sure to tum off
the Power when you do not watch the LCD Rear Projection Television for longer lamp life.
(_
TEMP indicator
This light is off during normal operation.
If this indicator is lit,the optic unit is too hot. If this indicator is blinking, the cooling fan has stopped, Please call service,
(_
LAMP indicator - NORMAL OPERATION INDICATOR IS OFF
If light is lit, the lamp has failed. See page 69-72 for lamp replacement procedure. Consult your Hitachi dealer for proper part.
If light is blinking, lamp cover is not assembled securely after replacement.
IMPORTANT NOTES:
A small number of missing, discolored, or lit all the time dots or pixels is characteristic of TFT LCD technology due to the
manufacturing process irrespective of manufacturer.

Advertisement

Table of Contents
loading

Table of Contents