Table of Contents
Advertisement
CONNECTING
EXTERNAL
VIDEO DEVICES
CONNECTING A STEREO SOURCE TO INPUTI-INPUTS
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set
.......
below
i
2.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.
C_nnect the cab_e fr_m the A_D__ _UT L _f the VCR _r the _aserdissp_ayert_ the INPUT (A_D___L) jack_
4.
Press the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the VCR or laserdisc player.
....
The VIDEO OSD label disappears automatically after approximately four seconds.
it=
5.
Select Antenna from the INPUTS menu to retum to the previouschannel.
L V
OO
VCR
NOTES:
1. Completely insert the connection cord plugs when connec_ng to rear panel acks. The picture and sound that is
played back will be abnormal if the connection s oose.
2. A single VCR can be used for VCR #1 and VCR #2 (see page 12), but note that a VCR cannot record its own video
or line output. Refer to your VCR operalJngguide for more informa_on on line input-outputconnecfdons.
16
Advertisement
Table of Contents
