Unpacking And Checking Contents; Tools Needed - Craftsman 113.20680 Owner's Manual

C • i ¸ . • • • •• •
unpacking and heckmg contents:
Your: jointer:planer is ;shipped: complete in one carton
(_thou_: motor or Stand)_
Separateatl parts from packing materials and check each
item ;with illustration and "*Tabie: of Loose Parts'. Make
certain all items are accounted for, before discarding any
packing material.
If any parts are missing, do not attempt to assemble the
jointer-ptaner, plug in thepower cord or turn the switch on
until the missing parts are obtained and installed correctly.
Using a 1/2 inch wrench, remove the wood attached to the
machine. Save the nuts, bolts and washers. You will need
them for attaching the machine to the stand.
Remove the protective 0il that is applied to all unpainted
metal surfaces. Be careful when cleaning the cutter head.
Use any ordinary household type grease and spot remover.
CAUTION: Never use gasoline, na_ha or similar highly
volatile solvents.
Wipe all parts thoroughly with a clean cloth.
Apply a coat of automobile wax to the tables and fence.
This will help prevent rust and make it easier to feed the
work while planing.
3 4
1,,.
Qty.
1 : Jointer-Planer ....................... 1
12 .i V:Belt, li2x 52". .................... !
IV-Belt, 1/2 x 37", .................... 1
3 5/32 Setscrew Wrench .................. 1
4 1/8 Setscrew Wrench ................... 1
5 Motor Pulley, 2-1/2"' Dia ................ 1
6 Sliding Guard Knob ................... 1
7 Concave Washer ...................... 2
8 Sliding Guard ....................... 1
9 Sliding Guard Rod .................... 1
10 Nut, 1/2- 13 ........................ 1
11 Lockwasher, 1/2 ..................... 1
12 Lockwasher, No. 10 ................... 2
13 Screw, Pan Hd., 10- 32 x !/4 ............. 2
14 Owners Manual ...................... 1
15 Depth of Cut Handwheel ................ 1
16 Screw, Sims, 1/4 - 20 x 1-1/4 ............. 1
17 Jointer-Ptaner Belt Guard ............... t
18 Attaching Hardware (2 Nuts, 2 Bolts)
19 Motor Pulley Belt Guard ................ 1
20 Belt Guard Clips ..................... 3
21 Belt Guard Support Bracket .............. 1
22 Belt Guard Support ................... 1
23 2 self tapping screws
24 Switch Key ......................... 2
t 25 Hold OownlPush Block .... • • ..._.. ..... 2
eSu pplied in Canada Only
5
14
21 20
19
18 t7
16
II IIII IIII II II I I III , I, 11 HI IIIIIIIIIIII I I "'; '": ' , ......................................................
•• : : ; ::•:•: : :/:i/: : i' %•
Square