General Maintenance; Wiring Diagram; Lubrication - Craftsman 113.20680 Owner's Manual

E
general: rna intenance
Keep your jointer-planer clean. Put a carton or some kind Do not allow chips to accumulate on the underside of the
of a Container underneath your jointer-planer to Catch jointer-planer.
the chips. The container should reach above the top of:
the motor. Frequently blow out any dust that may accumulate in-
side the motor.
Do not allow pitch to accumulate on the tables, the
fence, the cutter guard, the cutter head or the knives. For motor maintenance, follow instructions furnished
Clean them with Craftsman Gum and Pitch Remover. with motor.
Apply a thin coat of automobile-type wax to the tables
and fence so that the wood slides easily while feeding.
If power cord is worn or cut, or damaged in any way,
have it replaced immediately.
wiring: diagram
E
_ MOTOR WHITE _
OUTLET 11 SWITCH Cap, Flag J
L I _ _ /',, Terminal- I
m m
m m
lubrication
The BALL BEARINGS in this machine are packed with
greaseatthe factory. They require no further lubrication.
The following parts should be oiled occasionally with
SAE No. 20 or No. 30 engine oil.
1. Dovetail spacer and dovetail slide.
2 !. Elevating screw(first Clean: with Craftsman Gum and
Pitch RemoVer). ,
DOVETAi L
SPACER AND S LIDE
VIEW LOOKING UP FOR
PARTS IDENTIFICATION