Hitachi XP P9500 User Manual page 560

8. Messages
If you want to execute
requirements, enter
KAPL01057-I
All the paths which pass the specified aa...aa will be changed to
the Online status. Is this OK? [y/n]:
Details
All multiple paths will place online status because the
was specified. To continue this operation, enter
enter .
n
aa...aa:
CHA
Action
If you want to execute
requirements, enter
KAPL01058-W
The specified parameter value is not needed. Operation name =
aa...aa, parameter = bb...bb, parameter value = cc...cc
Details
A parameter value was specified in a parameter that does not need a parameter
value.
aa...aa:
clear
bb...bb: Parameter name
cc...cc: Parameter value
Action
Execute
parameter and parameter value, and then retry. For details on the
see 6.3 help (Displays the Operation Format).
KAPL01059-W
Cannot specify the parameter aa...aa at the same time if you
specify parameter bb...bb and parameter value cc...cc. Operation name
= dd...dd
Details
A parameter value is conflicting with the value of another parameter.
aa...aa: Parameter name
bb...bb: Parameter name
cc...cc: Parameter value
536
offline
. If you want to terminate processing, enter
y
port or
HBA
online
. If you want to terminate processing, enter
y
, ,
offline online
operation-name of the HDLM command (
help
processing for the paths that meet the specified
-hba
. To discontinue this operation,
y
processing for the paths that meet the specified
, , or
set view
.
n
or parameter
-cha
.
n
) to check the
dlnkmgr
operation,
help