Figure 4-2: System Configuration for Replacing a Fiber Cable (Explained in the
Following Steps)
To replace a fiber cable:
1.
Place in Offline (C) status the path that goes through the fiber cable to be replaced
(path that goes through the HBA to which the fiber cable is connected).
For example, to place in Offline (C) status the path that goes through the HBA
with host port number
command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
While the path that goes through the HBA with host port number
Offline, the status of the path that goes through the HBA with host port number
is Online.
0002
and bus number
0001
0000
4. HDLM Operation
, execute the following
is placed
0001
365