3. Creating an HDLM Environment
Figure 3-35: Example of Executing the dlnkmgr Command's View Operation
(With -drv Specified)
In the example, the name of the logical device file of the HDLM device that
corresponds to
2.
In the
/etc/fstab
that for the HDLM device that you confirmed in step 1.
The following is an example of editing the
• For FC-SAN environments
# /dev/sda
/dev/sddlmaa
• For IP-SAN environments
# /dev/sda
/dev/sddlmaa
This example comments out the line for
the SCSI device) and adds a line for
the HDLM device). For IP-SAN environments, specify
288
can be identified as
/dev/sda
file, change the logical device file name for a SCSI device to
/mnt/sda
/mnt/sda
/mnt/sda
/mnt/sda
/dev/sddlmaa
.
sddlmaa
file:
/etc/fstab
ext2
defaults
ext2
defaults
ext2
defaults
ext2
_netdev
(logical device file name of
/dev/sda
(logical device file name of
_netdev
0 0
0 0
0 0
0 0
for the mount