When Using Red Hat Enterprise Linux 5, Or Red Hat Enterprise Linux 6 - Hitachi XP P9500 User Manual

3.15.3 When Using Red Hat Enterprise Linux 5, or Red Hat
Enterprise Linux 6
To specify settings for RHCM:
1. Stop the service of the RHCM cluster.
Stop the RHCM service with the following command if the service is running:
# service rgmanager stop
# service cman stop
2. Change the SCSI device being used by RHCM to an HDLM device.
Edit as shown below if the lower SCSI device (
(
/dev/sddlmaa
# ACTION=="add", KERNEL=="sda", RUN+="/bin/raw /dev/raw/raw1
%N"
ACTION=="add", KERNEL=="sddlmaa", RUN+="/bin/raw /dev/raw/
raw1 %N"
Comment out
3. If you will restart the host, go to step 4. If you will not restart the host, go to step 5.
4. Restart the host to apply the changes made in step 2.
Execute the following command to restart the host:
# shutdown -r now
RHCM setup is complete.
5. Execute the following command to apply the changes made in step 2.
# /sbin/start_udev
6. Start the cluster service of RHCM.
Executing the following command to start the service:
# service cman start
# service rgmanager start
) is being used as
/dev/raw/raw1
and add
KERNEL=="sda"
3. Creating an HDLM Environment
) of the HDLM device
/dev/sda
.
KERNEL=="sddlmaa"
.
267