Format; Dlnkmgr Offline [-Path] -Hba Hbaportnumber.busnumber [-S] Dlnkmgr Offline [-Path] -Cha -Pathid Autopath_Id [-S]; Dlnkmgr Offline [-Path] -Pathid Autopath_Id [-S]; Dlnkmgr Offline [-Path] -Device Scsi_Device_Name [-S] - Hitachi XP P9500 User Manual

device name is
# /opt/DynamicLinkManager/bin/dlnkmgr offline -path
-device /dev/sde
KAPL01052-I The currently selected paths will be changed
to the Offline(C) status. Is this OK? [y/n]:y
KAPL01053-I If you are sure that there would be no problem
when the path is placed in the Offline(C) status, enter
y. Otherwise, enter n. [y/n]:y
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
Example
The following example shows how to place a path, whose AutoPATH_ID is
000001
from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -pathid 1
-s
KAPL01061-I 1 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#
(2) To Display the Format of the Offline Operation
-help
Displays the format of the
Example
The following example shows how to display the format of the
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:

Format

[-s]

Valid value

while confirming command operation.
/dev/sde
, offline without asking for confirmation of command execution
offline
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]

dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]

dlnkmgr offline [-path] -device SCSI_Device_Name [-s]

operation.
6. Command Reference
offline
407