Hitachi XP P9500 User Manual page 434

6. Command Reference
Specify the host port number and bus number of the target HBA port: the numbers
are found in the PathName field displayed using the
period between these two parameter values. For details about the
see 6.7 view (Displays Information).
Example
The following example shows how to place online all paths connected to an
HBA port whose host port number is
When the confirmation message is displayed, the user enters
or
n
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba
0010.0000
KAPL01057-I All the paths which pass the specified HBA
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-cha -pathid
Use this parameter to place online, at one time, all the paths that pass through a
specific CHA port. The command will place online all the paths that pass through
the CHA port to which the path with the specified AutoPATH_ID is connected.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view
Information). Leading zeros can be omitted (
AutoPATH_ID); however, when the target AutoPATH_ID is
000000
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the HDLM-configuration definition utility
(
dlmcfgmgr
current AutoPATH_ID of the target path, before executing the
Example
The following example shows how to place online the paths connected to the
CHA port
connected to the target CHA port:
When the confirmation message is displayed, the user enters
or
n
# /opt/DynamicLinkManager/bin/dlnkmgr online -cha
-pathid 000002
410
to cancel the operation.
AutoPATH_ID
operation. For details about the
or for the parameter value.
0
). Always make sure that you use the
. In this example, a path whose AutoPATH_ID is
0A
to cancel the operation.
operation. Enter a
view
and bus number is
0010
operation, see 6.7 view (Displays
view
and indicate the same
000001 1
000000
operation to find the
view
online
operation,
view
:
0000
to continue,
y
, enter
operation.
is
000002
to continue,
y