Create A Volume And Finish Creating Management Group; Management Group Map View Tab; Logging In To A Management Group; Configuration Summary Overview - HP StoreVirtual 4000 User Manual

5. Add the VIP and subnet mask.
6. Click Next.

Create a volume and finish creating management group

Optional: If you want to create volumes later, select Skip Volume Creation and click Finish.
1. Enter a name, description, data protection level, size, and provisioning type for the volume.
2. Click Finish.
NOTE:
3. Click OK.
4. Review the details on the Summary window and click Close.
NOTE:
Wizard to create another management group. You have a choice to repeat the wizard with
the same values that were used the first time.
5. Save a .txt file of the configuration information for the entire management group.
See "Saving the management group configuration information" (page
When the management group is created, check the Best Practice Summary to verify that the
configuration is following best practices for availability and data protection. See
summary overview" (page

Management group map view tab

After you create the management group and finish setting up the SAN, use the Map View tab for
viewing the relationships between servers, sites, clusters, volumes, snapshots, and remote copies
in the management group. For more information on using the map view tools, see
View" (page

Logging in to a management group

You must manually log in to a management group. After you have logged in to one management
group, the CMC attempts to use the credentials from the first login when you log in to additional
management groups.
CAUTION:

Configuration Summary overview

The Configuration Summary provides a reference for managing the size and optimum configuration
of your SAN. A Configuration Summary is created when the first management group is created
Figure 42 (page
management groups are added to the Configuration Summary. For each management group, the
Configuration Summary displays an overview of the volumes and snapshots, iSCSI sessions, and
storage systems in the management group and in clusters, and provides guidance for the optimal
configuration.
NOTE: You can also view the Configuration Summary in the Configuration Summary pane on
the SAN Status Page.
106 Working with management groups
A message opens notifying you to register and receive license keys.
You can run the wizard again from the Summary window. Click Repeat this Entire
109).
17).
Do not log in to the same management group from more than one CMC.
107). Select Configuration Summary in the navigation window to view it. Subsequent
114).
"Best Practice
"Using the Map