Create A New Volume Group; Edit Selected Volume Group - HP StorageWorks 8000 - NAS Installation And User Manual

NAS Data Path Manager

Create a New Volume Group

To create a new volume group:
1. In Command View NAS, click the Storage tab.
2. Navigate to Volume Groups.
3. Select Actions > Create New Volume Group to bring up the Create New
4. Enter a name for your new volume group in the Volume Group Name field.
5. Select an appropriate LUN from the Available LUNs list and click OK to
6. Continue to select and move LUNs, as appropriate.
7. Click OK to create the volume group and return to the Volume Groups table

Edit Selected Volume Group

To edit an existing volume group:
1. In Command View NAS, select the Storage tab
2. Select Volume Groups, then the View Volume Groups icon (first icon to the
3. Select the volume group you want to rename by clicking the row.
4. Select Actions > Edit Selected Volume Group to bring up the Edit Volume
Note:
Also, you can not remove LUNs that are already part of the volume group.
5. Click OK to save changes and exit the dialog box.
24
Volume Group dialog box.
move the name to the Allocated LUNs list.
view.
right of Actions) to use the table view.
Group dialog box.
To change the volume group name, type in the corrected name in the
Volume Group Name field.
To add a LUN, select it from the Available LUNs field, click the Add
button. The LUN will move to the Allocated LUNs field.
To change your mind about adding a LUN, select it from the Allocated
LUNs field, click the Remove button. The LUN will move back to the
Available LUNs field.
The Remove button will be inactive if there is only one array per volume group.
hp StorageWorks NAS Data Path Manager Installation and User's Guide