Removing The Active Directory Configuration - HP StoreVirtual 4000 User Manual

a.
b.
c.
5. Click OK when you have finished editing the group.
6. Log out of the management group and log back in using your UPN login (e.g.,
name@company.com) to verify the configuration.

Removing the Active Directory configuration

NOTE: HP recommends logging in as a local SAN/iQ user to remove the Active Directory
configuration or external group association.
To remove the Active Directory credentials from the SAN:
1. Select the Administration category of the management group.
2. Click Administration Tasks and select Configure External Authentication.
3. Click in each field and delete the data in the field.
4. Click Save.
To remove the external group association from the SAN/iQ group, which saves the credentials
for use with a different SAN/iQ group:
1. Select the Administration category of the management group.
2. Select the group with the external group association, click Administration Tasks and select
Edit Group.
3. Click in the Associate an External Group field and delete the data.
4. Click OK to save the group without the external group association.
Click Find External Group.
Enter the user name in the Enter AD User Name box and click OK.
Select the correct group from the list that opens of Active Directory Groups and click
OK.
Using Active Directory for external authentication 81