Managing disks
Use the Disk Setup tab to monitor disk information and perform disk management tasks as listed
in
Table 9 (page
Table 9 Disk management tasks for storage systems
Disk setup function
Monitor disk information
View Disk Details
Activate Drive ID LEDs
Getting there
1.
In the navigation window, select a storage system.
2.
Select the Storage category in the tree below it.
3.
Click the Disk Setup tab.
Reading the disk report on the Disk Setup tab
The Disk Setup tab provides a status report of the individual disks in a storage system.
Figure 10 (page 35)
disk report.
Figure 10 Example of columns in the Disk Setup tab
35).
shows the Disk Setup tab and
Where available
All storage systems
Storage systems running version 9.5.01 or later
Storage systems with this specific capability
Table 10 (page 36)
describes the corresponding
Managing disks
35