Starting A Virtual Manager To Regain Quorum - HP StoreVirtual 4000 User Manual

TIP: Always use a Failover Manager for a two-system management group.
1. Select the management group in the navigation window and log in.
2. Click Management Group Tasks on the Details tab, and select Add virtual manager.
3. Click OK to confirm the action.
The virtual manager is added to the management group (1,
tab lists the virtual manager as being added, and the virtual manager appears in the
management group (1,
Figure 52 Management group with virtual manager added
1. Virtual manager added

Starting a virtual manager to regain quorum

Only start a virtual manager when it is needed to regain quorum in a management group.
(page 128) illustrates the correct way to start a virtual manager when necessary to regain quorum.
When starting a virtual manager, it should ideally be on a storage manager that is not already
running a manager. However, if necessary, you can start a virtual manager on a storage system
that is already running a manager, as shown in
1. Select the storage system on which you want to start the virtual manager.
2. Click Storage System Tasks on the Details tab, and select Start Virtual Manager.
Figure 52 (page 129)).
Figure 53 (page
Figure 52 (page 129)). The Details
130).
Using a virtual manager 129
Figure 51