Environments And Installation; Environmental Conditions - Epson G10 Series Manual

3. Environments and Installation

3.1 Environmental Conditions

A suitable environment is necessary for the robot system to function properly and safely.
Be sure to install the robot system in an environment that meets the following conditions:
Ambient temperature
Ambient relative humidity
First transient burst noise
Electrostatic noise
Environment
NOTE
Manipulators are not suitable for operation in harsh environments such as painting areas,
etc. When using Manipulators in inadequate environments that do not meet the above
conditions, please contact us.
*1 The ambient temperature conditions are for the Manipulators only. For the Controller
the Manipulators are connected to, refer to the Controller manual.
G10 / G20 Rev.2
Setup & Operation 3. Environments and Installation
Item
*1
5 to 40°C
10 to 80% (no condensation)
2 kV or less
6 kV or less
· Install indoors.
· Keep away from direct sunlight.
· Keep away from dust, oily smoke, salinity, metal
powder or other contaminants.
· Keep away from flammable or corrosive solvents
and gases.
· Keep away from water.
· Keep away from shocks or vibrations.
· Keep away from sources of electric noise.
Conditions
(with minimum temperature variation)
27