Sony Grand Wega KF-60DX100 Operating Instructions Manual page 83

Other Information
Problem Possible Remedies
Only snow and noise +_1 Check the Cable setting in the Channel menu
see "Cable"
on page 62).
appear on the screen _ Check the anterma/cable connections
U Make sure the channel is broadcasting programs.
Press ANT to change the input mode €see page 46L
Dotted lines U Adjust the antenna.
or stapes _1 Move the LCD projection TV awa 3 from noise sources such as cars. neon mgtls, or
hair-dryers.
LCD projection TV is fixed to Ij Use Auto
Program
in the Channel menu to add receivable channels that are not
one channel presently m TV memory (see page 63)
Cl Check your Channel Fix settings tsee page 63).
Double images, ghosts, or LI Use a hlghly directional outdoor antenna or a cable (when the problem is caused by
merged colors reflections from nearby mountains or tall buildingsj.
Set the image Revlmon to an appropriate vahte. The default setting Is Auto. if
ghosts, doubled images, or merged colors appear with Auto. select the best value
from 0 to 3 +see page 68/,
Cannot operate menu I_1 if the item you want to choose appears m gray, you cannot select it.
E_I Turn the LCD projection TV's power off and on again.
Cannot recelve an) channels _1 Use Auto Program in the Channel menu to add receivable channels that are not
when using cable TV presently m TV memory tsee page 63).
LI Check your cable settings
+J Make sure Cable is set to ON in the Channel menu see page 62_.
Carmot gain enough volume LI increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press TV (FUNCTION) and adjust the LCD projection TV's volume
Channel Index does not display _ Make sure Cable is set to ON in the Channel menu, see "Cable" on page 62),
all available channels 1.1 Use Auto
Program
in the Channel menu to add receivable TV channels that are
not presently m TV memory/see page 63"_
Cannot receive channels _ Use Auto
Program
in the Channel menu to add receivable TV channels that are
Unable to select a channel not presently m TV memory (see page 63).
Los! password _1 in the password screen see page 69h enter the following master password: 4357.
The master password clears your previous password; it cannot be used m
temporardy unblock channels.
Carmot change channels with _ Be sure you have not inadvertently switched your LCD projection TV from
the remote control channel 3 or 4 setting if you are using another device to change channels.
E_I if you are using another device to control channels, be sure the "function" button
for that device has been pressed, or the slide switch is set correctl) For example, if
you are usmg yore" cable to control channels, be sure to press SAT/CABLE.
Cannot cycle through the other t21 Be sure the Video Label feature has not been set to Skip (see page 68).
wdeo eqmpment connected to
the LCD proJection TV
fhere is a black box on the +_1 You have selected a text option in the Setup menu and no text is available., see
screen page 67 to reset Setup selections +To turn this feature off. select OFF in the
Caption
Vision optmn, If you were trying to get closed capuemng, select CC 1
mstead of Text 1-4.
(Continued)
83
0
0