Sony Grand Wega KF-60DX100 Operating Instructions Manual page 40

Installing and Connecting the LCD Projection TV
Connecting an AV Receiver
For greater control of all audio and video eqmpmenr, connect an AV receiver•
'-_ Change "Video Label" for the VIDEO1 input to "Receiver" [see page 681
Disconnect all power sources before making any connections,
1 Connect the coaxial cable from the incoming cable connection or
antenna re IN on the VCR,
2 Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the
LCD projection TV
3 Using a VIDEO cable, connect VIDEO of V1DEO l IN on the LCD
projection TV to MONITOR OUT on the AV receiver.
4 Using an AUDIO/VIDEO cable, connect TV OUT on the LCD
projection TV to AUDIO/VIDEO 2 1N on the AV receiver,
5 Using an AUDIO/VIDEO cable, connect the video eqmpment to the AV
reeeiveE
6 Select the Setup menu and set "Video Label" to +'Receiver" to fix your
LCD projection TV's input to AV receiver _see "Video Label" on page
68).
Rear of LCD projection TV
Coaxial cable (not supplied)
A
• / ;_ •i/• _ Z _
AUDtO-L _ _ VIDEO
VIDEO AUDtO-R
3 4
VMC-10HG (not supplied)
t
VMC-810S/820S
(not supplied)
5
i tble/
Antenna
1
VMC-810S/820S
{not supplied)
VMC-810S/820S (not supplied)
AUDIO/ AUDIO/
VIDEO 2 IN VIDEO 1 tN
MONITOR
AV receiver AUDIONIDEO 1 OUT
40