Sony Grand Wega KF-60DX100 Operating Instructions Manual page 30

Installing and Connecting the LCD Projection TV
Connecting a VCR and Cable Box
Use this hookup if:
Your cable TV company scrambles some channels, but not all of them
tpay channels vs. regular cable channels) and you need to use a cable
oox. and
El You want to enjoy the Twin View feature.
With this setup you can:
Use the LCD projection TV remote control to change channels on your
cable box when the signal is scrambled. To program your Sony remote
control to operate your cable box, see "'Programming the Remote
Control" on page 77.
Use the LCD projection TV remote control to change channels using
your LCD projection TV when the signal is not scrambled. Your LCD
projection TV's tuner provides a better signal titan the cable box.
Use the Twin View feature. When all channels are routed through your
cable box. only one mgnal is sent to the LCD projection TV. so you
cannot use the Twin View feature.
Disconnect all power sources before making any connections.
1 Connect the Cable TV cable to the LCD projection TV's VHF/UHF
jack.
2 Using a coaxial cable, connect the LCD projection TV's TO
CONVERTER jack to the cable box's IN iack. The LCD projecnon
TV's internal converter allows you to switch between unscrambled
signals coming straight into the LCD projection TV and scrambled
signals coming in through the cable box. eliminating the need for an
external splitter.
3
4
Using a coaxial cane. connect the cable box's OUT jack to the VCR's
IN jack.
Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUI jacks to the LCD projection TV's AUDIO and S VIDEO
IN jacks.
5 Using a coaxial cable, connect the VCR's OU_I jack to the LCD
projection TV's AUX jack.
To view scrambled channels, set your LCD projection TV to AUX 3 or 4
(depending on your cable box output) Changechannels using your
cable box
3O