Sony Grand Wega KF-60DX100 Operating Instructions Manual page 82

Other Information
Troubleshooting
If, after reading these operating instructions, you have additional questions related to the use of your
Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S.
residents only) or (416) 499-SONY (7669) (Canadian residents only).
Problem Possible Remedies
No plcture
(screen not lit P.
[10 sound
Remote control
does not operate
LJ Make sure the LCD pmjectlon TV's power cord is cormected securely to the wall
outlet.
7J Push the power button on the front of the LCD projection TV.
C.J Check to see if the TV/VIDEO setting is correct: when watching TV. set to TV.
and when watching connected eqmpmem, set to VIDEO 1.2.3.4.5 or B.
LI Try another channel, it could be station trouble.
LJ The Parenta! Control feature is activated /see "Using the Parent Menu" on page
691
cJ if your LCD projectlon TV's power is on. and LAMP (red _indication is flashing,
the lamp for the light source burns out. Replace it with new Son 3 XL-2000U
replacement lamp (see page 13),
CJ if your LCD projection TV does not turn or,. and a red light keeps flashing, your
LCD projection TV may need service. Call your local Sony Service Center.
F.J Batteries could be weak. Replace the batteries.
(J Press TV [FUNCTION) when operating your LCD projection TV_
7J Make sure the LCD projection TV's power cord is cormected secural,v to the wall
outlet.
I.t Locate the LCD projection TV at least 3-4 feet away from fluorescent lights.
Cl Check the orientation of the batteries
Dark, poororno
picture t screen lit).
good sound
Good plcture. I_
no sound
IJ
IJ
Carmot receive digital channels I_l
(when a DTV receiver is
connecreo Id
Adj ust the Picture setting in the Video menu E see page 58 I.
IJ Adjust the Brightness setting in the Video menu see page 58).
LI Check antenna/cable connections.
It is strongly recommended to connect the antenna using a 75-ohm coaxial cable
to get opnmum picture quality. A 300-ohm twin lead cable can be easily affected
h3 radio noise and the like. resulting m signal deterioration, if you use a 300-ohm
twin lead cable, keep It away as far as possible from the LCD projectmn TV.
Do not use an indoor antenna because it is especially susceptible to radio noise _see
page 25 I.
Press MUTING so that '_MUTING" disappears from the screen t see page 43),
Make sure
Speaker
is set to ON in the Audio menu see page 611.
Check the MTS setting in the Audio menu, see "MTS" on page 61 ).
Check the connectior_s between the DTV receiver and the LCD prqlection TV t see
page 38),
Check your local listings to find out if you can receive dlgltal broadcasts in your
area
Cannot receive upper channels Id Change Cable to OFF I see page 62),
UHF/when CJ Use Auto Program in the Channel menu to add receivable channels that are not
using an anterma presently m TV memory tsee page 63/
No color lJ Adjust the Color settings in the Video menu E see page 58 I.
82