Sony Grand Wega KF-60DX100 Operating Instructions Manual page 32

Installing and Connecting the LCD Projection TV
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can record from one VCR to the other while
using your LCD projection TV to monitor what is being recorded.
Disconnect all power sources before making any connections,
1 Using AUDIO and VIDEO cables, connect the playback VCR's Audio
and Video OUT:acks to the recording VCR's Audio and Video JN
jacks.
2 Using AUDIO and VIDEO cables, connect the recording VCR's
AUDIO and Video OUT jacks to the LCD projection TV's AUDIO and
VIDEO IN jacks.
VCR (playback)
[o®o]u.,
_m0 RAIIgl0 L If_0
UNE OUT
-_ VCR [recording)
UNE
II
_J_O R AUDIO L _DF.O
UNE OUT
O UT N
AUDIO-R {red)
AUDIO-L (white) _
VIDEO (yellow)
Rear of LCD projection TV
VMC-810S/820S (not supplied)
'._ To perform tape editing, set the LCD projection TV to the video input
intendedfor playback by pressing TV/VIDEOon the remote control.
'_ You may need to changethe video input on your VCR.Consult your
VCR'soperating manual for instructions
'-_ If your VCRs have an S VIDEO jack For best picture quality, use an
S VIDEOconnection instead of the yellow video cableo_ your combined
A/V cable.
Using an S VIDEOcable connect the playbackVCR'sS VIDEOOUTjack
to the recording VCR'sS VIDEOINjack S VIDEOdoes not provide audio
so audio cables must be connected to provide sound.
'_ You cannot record signals from equipment connectedto the Y.PB.PR
input
32