Setting The System Date; Keypad Control Tones (Beeps) - GE NX-108E - Security NetworX NX-4 System User Manual

Setting the system date

Step 1 Enter [r] [9][6].
Step 2 Enter [master code].
Step 3 Enter the "Day of Week "
Step 4 Enter the "Month Code". Must always be two (2) digits.
Step 5 Enter the "Day Code". Must always be two (2) digits.
Example: The 5
Step 6 Enter the last two digits of the "Year Code".
Example: For 2003 enter [0] – [3].

KEYPAD CONTROL TONES (BEEPS)

A sounder is built into the keypad. If programmed, your system keypad may sound for any of the following
reasons:
•
Beeps for all keypresses.
•
Sounds a continuous tone during the Entry delay time.
•
Pulses when a day zone is violated while the system is disarmed.
•
Pulses when a FIRE zone has a trouble condition.
•
Beeps 3 times for trying to arm with the "Ready" light off, if "Force Arming" has not been selected.
•
Beeps for 1 second or emits a "ding-dong" sound for the "Chime" feature.
•
Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit delay; and beeps 1 second at
the end of the exit delay.
•
Pulses when the armed status changes and the AC power is off.
•
Pulses when the armed status changes and any zone(s) are bypassed.
•
Pulses when the armed status changes and a low battery is detected.
•
Pulses when the armed status changes and a Tamper condition is detected.
•
Beeps to indicate Telephone Line Cut, if selected.
•
Pulses when one or more of the following conditions are detected: Zone or Box Tamper, Low Battery, AC
Power Fail, or Expander trouble.
•
Beeps 3 times every minute indicating a low battery or missing transmitter is detected (if wireless device is
in system). Entering code will suppress the sounder for 12 hours.
Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system will
not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a trouble
condition exists.
NX-108/116/124E User manual
1 = Sunday 3 = Tuesday
2 = Monday 4 = Wednesday
01 = January 05 = May
02 = February 06 = June
03 = March 07 = July
04 = April 08 = August
would be entered as [0] – [5].
th
5 = Thursday
6 = Friday
09 = September
10 = October
11 = November
12 = December
Page 16
7 = Saturday
10/11/05