Trimming
Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge settings screen. For setting items,
see
PictBridge settings
.
1.
Make sure that the machine is turned on.
2.
Press the Menu button repeatedly until Device settings appears.
3.
Use the
button to select PictBridge settings, then press the OK button.
Page top