Selecting A Receive Mode - Canon 4204B019AA User Manual

1.
Display the DRPD: Fax ring pat. screen.
Press the FAX button, and press the
(1)
Use the (-) or
(2)
menu, and press the OK button.
Use the (-) or
(3)
button.
2.
Select the ring pattern.
Use the (-) or
(1)
company assigned to your fax number.
Select from Normal ring, Double ring, Short-short-long, Short-long-short, or Other ring type.
button.
Press the
(2) OK
3. Press the FAX button to return to the fax standby screen.

Selecting a Receive Mode

You can select the receive mode suitable for your fax use conditions: whether or not you receive
voice calls, and if you receive voice calls, how frequently you receive faxes or voice calls, etc.
Select the receive mode according to the following procedure.
Each mode has the option settings. Specify those settings if necessary.
For details, refer to the on-screen manual:
When receiving voice calls (with a telephone or answering machine
connected to the machine):
When mainly receiving a voice call:
TEL priority mode
When a call incomes, the telephone will ring.
- If the call is a voice call, pick up the handset.
- If the call is a fax, pick up the handset. When the machine starts receiving the fax, hang up the
handset.
- If the answering machine is connected, the message will respond when you do not pick up the
handset.
Note
Available settings for a fax
Set the machine to receive the fax automatically even if you do not pick up the handset.
Manual/auto switch
Change the number of seconds until the machine starts receiving the fax.
RX start time in Manual/auto switch
When mainly receiving a fax:
Fax priority mode
When a call incomes, the telephone will ring.
voice call automatically.
- If the call is a fax, the machine will receive the fax automatically.
- If the call is a voice call, the machine will ring.
Note
Menu
(+) button to select Reception settings in the Fax settings
(+) button to select DRPD: Fax ring pat., and press the
(+) button to select the ring pattern that your telephone
Advanced Guide
*1
*2
The machine detects whether the call is a fax or
*1
button.
.
OK