Appendix D: Useful Vc Cli Command Sets - HP Integrity BL890c - i2 Server Manual

Appendix D: Useful VC CLI Command sets

The following are a collection of useful VC CLI commands. These CLI commands and many more are
documented in detail in Virtual Connect Manager Command Line Interface Version 1.31 (or later) User
Guide. The following CLI commands can be copied and pasted into an SSH session with the VCM and
will apply immediately upon paste.
VC Domain Configuration
#Enclosure Setup
#Import Enclosure and Set Domain Name
#Ensure password matches the OA password
import enclosure username=Administrator password=Administrator
set domain name=VC_Domain_1
#Importing additional or multiple Enclosures to an existing VC Domain
# Importing an Enclosure into an existing VC Domain (Note: As of this writing (VC firmware 2.30)
the following commands must be executed individually and cannot be part of a larger script).
#The IP address, login and password information used in this command are from the OA of the
enclosure being imported.
Import enclosure 10.0.0.60 UserName=Administrator Password=password
Import enclosure 10.0.0.30 UserName=Administrator Password=password
Import enclosure 10.0.0.40 UserName=Administrator Password=password
#Configure MAC and WWN to VC Defined and select pool #1
set domain mactype=vc-defined macpool=1
set domain wwntype=vc-defined wwnpool=1
set serverid type=vc-defined poolid=1
#Change Administrator
set user Administrator password=Administrator
# Set Advanced Ethernet Settings to "Map VLAN Tags" and set "Force server connections" to
disabled
set enet-vlan vlantagcontrol=map sharedservervlanid=false
# Set Advanced Ethernet Settings to "Tunnel VLAN Tags"
set enet-vlan vlantagcontrol=tunnel
# Set Advanced Ethernet Settings to a Preferred speed of 500Mb and a Max Speed of 2500Mb
Appendix D: Useful VC CLI Command sets 226