Keylock; Simulate Mode - NorthStar EXPLORER AP380 Installation And Operation Manual

3-12-1 The alarm window
The alarm window shows a list of the latest active
alarms. The most severe alarms appear at the top
of the list.
Turn the Control Dial to stop the Explorer AP380
from beeping.
Select 'Details' to acknowledge the displayed
alarms and jump directly to the Alarm history
screen.
Select 'OK' to acknowledge the displayed alarms.
3-12-2 Active alarms
The Active alarms screen shows a list of the
currently active alarms.
To show the Active alarms screen:
• Select 'Active alarms' in the Display menu or,
• Go to Menu > Setup > Alarms > Active alarms.
Turn the Control Dial to select an alarm in the list
and press to see the Alarm details.
Northstar Explorer AP380 System Installation and Operation Manual
3-12-3 Alarm history
The Explorer AP380 keeps a record of alarms.
The Alarm history screen shows a list of up to 18
recorded alarm events.
To show the Alarm history screen:
• Select 'Details' from the alarm window or,
• Go to Menu > Setup > Alarms > Alarm History.
Turn the Control Dial to select an alarm in the list
and press to see the Alarm details.
3-12-4 Alarm details
The alarm details window shows extra detail on
an individual alarm.

3-13 Keylock

When keylock is activated, the Explorer AP380 will
ignore most key presses.
• To turn keylock on:
Press and hold the
locked' message will appear and a small lock icon
will appear on the lower right-hand display.
• To turn keylock off:
Press and hold the
unlocked' message will appear and the keys are
re-enabled.

3-14 Simulate mode

If the word 'Simulate' flashes on the display, then
the unit is in simulate mode.
• Simulate mode allows you to become familiar
with the unit off the water.
• Simulate mode can be turned on or off: Menu
> Setup > Simulate menu.
Do not use simulate mode while at sea.
key for 2 seconds. A 'Keys
key for 2 seconds. A 'Keys
51