Appendix B - Specifications - Ap380 Display - NorthStar EXPLORER AP380 Installation And Operation Manual

Appendix B - Specifications - AP380 Display

Electrical:
Supply voltage: 10.5 to 30.5 V DC.
Supply current ( at 13.8 V):
Without backlighting: 160 mA.
With full backlighting: up to 410 mA.
Other optional instruments: refer to the
instrument's operation manual.
Interfaces
NavBus: connection to MCU and other Northstar
instruments.
AP380 Display unit power/data cable wires:
Pin Wire color
5 Red
1 Black
6 Orange
4 Blue
7 Yellow
3 White
8 Green
2 Brown
Pin Wire color
5 Red
1 Black
6 Orange
4 Blue
7 Yellow
3 White
8 Green
2 Brown
30
Black connector - Power and MCU
Signal
Power positive, 10.5 to 30.5 V DC
Power negative
NavBus +
NavBus -
Ignition wire
Factory use (isolate, do not cut)
External alarm, switched to ground, 30 V DC and 250 mA max.
Factory use (isolate, do not cut)
Green connector - NavBus expansion
Signal
Factory use (isolate, do not cut)
Power negative
NavBus +
NavBus -
Factory use (isolate, do not cut)
Factory use (isolate, do not cut)
Factory use (isolate, do not cut)
+9V out
Northstar Explorer AP380 System Installation and Operation Manual
Standards compliance:
EMC compliance:
USA (FCC): Part 15 Class B
Europe (CE): IEC 60945:2002 Clause 9 & 10.
New Zealand and Australia (C Tick):
IEC 60945:2002 Clause 9.
Environment:
IPx6 and IPx7 - completely waterproof.