Table of Contents
Advertisement
18-7 Installation: Northstar petrol/gasoline sensors
Fit the optional petrol/gasoline fuel kit following
the instructions supplied with the kit.
Note:
SmartCraft engines have fuel flow sensors,
therefore Northstar fuel sensors are not
required as well.
For dual engines, fit two kits.
Wire the Explorer for auto power (see section
18-4).
An optional GPS/fuel Y cable is required.
During setup:
a
set Y cable to
and set up Auto power off
(see sections 2-2 and 17-1)
b
set the fuel data (see section 17-5)
18-8 Installation: DSC VHF radio
Fit and set up the optional Northstar DSC VHF
radio following the instructions supplied with the
radio. During setup:
a
on the radio, enter buddy boats required
b
on the Explorer, set NavBus to
17-10)
76
(see section
Northstar Explorer 650 Installation and Operation Manual
GPS antenna (optional)
Yellow
Yellow
GPS/fuel Y cable
White
Power/data cable
Black
Orange
Blue
Radio power/data cable
Fuel sensor cable
- Quick Links:
- Plug-In Cards
Hide quick links:
Advertisement
Table of Contents
