About Display - NorthStar EXPLORER 550 Installation And Operation Manual

A routes file: The new routes are added to
any existing routes in the EXPLORER. If a new
route has the same name as an existing route
but has different data then the EXPLORER
asks which route to keep.
A track file: The new track will replace the
existing track in the EXPLORER.
To load a file to the EXPLORER:
1 Select the file to load.
2 Press and select Load.
Deleting a file from the user card
1 Select the file to delete.
2 Press and select Delete.
3 Select Yes to confirm.
Reading the file information
This reads the file names from the user card and
displays them. Reading does not load any file
data into the EXPLORER.
1 Press and select Card.
2 Select Read.

13 About display

40
Northstar EXPLORER 550/550i Installation and Operation Manual
Formatting the user card
Formatting prepares a user card for use. Format
the card if there is an error message saying that the
card is not formatted. Any data files on the card are
deleted.
1 Press and select Card.
2 Select Format.
3 Select Yes to confirm.
Sorting the file names
This sorts the displayed file names.
1 Press and select Sort.
2 Select sort by Name, Type or Time.
To show the about display, press
Other, then select About.
The about display shows:
The software version and date.
The world chart version.
Any card fitted.
The number of waypoints, routes and tracks
in the EXPLORER.
Wiring information for the EXPLORER
connectors.
In the unlikely event of having to contact a
Northstar dealer for service, quote the software
version number and date.
, select