Canon VB101 User Manual page 77

Retrieving values from Admin Viewer and changing settings
Start up Admin Viewer and set the view restriction from the camera angle.
To Make Settings...
1
2
3
From the Camera Selection box, select the camera
to be set, and select Apply the View Restriction.
Click the Admin Viewer button to start it up.
Use Admin Viewer to move the camera angle to the
position you want to set with the Upper, Lower, Left,
Right, Telephoto, and Wide-angle values, then click
the Get Value button for each. View restrictions set
can be checked in the View Restriction Values Entry
box, or with the View Restriction Preview frame.
Set these values so that Upper > Lower, Left <
Right, and Telephoto Wide-angle
Click the Send button. Check the Status List to be
sure the values were sent correctly. Then when the
Reflect set values button is clicked, the values will
be reflected in the VB101.
View Restriction Tool
4
77