Canon VB101 User Manual page 153

GS007 IP address conflict detected during operation (err)
Duplicate IP address %1
Message
Ethernet address
%1
Explanation An IP address conflict was detected during operation. This occurs when a network device
with the same IP address as the VB101 is started up after the VB101 was started up.
Response As for S006.
GS010 FAT (File Allocation Table) count error (err)
only 2 FATs are supported (FATs=%1)
Message
Number of FATs
%1
Explanation The number of FATs is not 2.
The file system may be corrupted or it may not be formatted as a FAT file system.
Response If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card.
GS011 Cluster size error (err)
cluster size is zero
Message
The size of clusters is zero.
Explanation
The file system may be corrupted or it may not be formatted as a FAT file system.
Response If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card.
GS012 Sector size error (err)
logical sector size is zero
Message
Explanation The sector size is zero.
The file system may be corrupted or it may not be formatted as a FAT file system.
Response If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card.
GS013 FAT entry count error (err)
file system has %1 clusters, but only space for %2 FAT clusters
Message
Number of clusters
%1
Number of FAT entries
%2
Explanation The FAT entry recording area for the number of clusters is not allocated.
The file system may be corrupted or it may not be formatted as a FAT file system.
Response If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card.
GS014 Root directory size error (err)
root directory size is zero
Message
The root directory size is zero.
Explanation
The file system may be corrupted or it may not be formatted as a FAT file system.
If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card.
Response
Log Messages
7
153