Canon VB101 User Manual page 121

Sample Still Picture Recording Settings
Settings specified on the "Camera and Video" page (→ P.43)
Specify the appropriate settings for the Camera 1 being used.
Settings specified on the "Preset" page (→ P.47)
Set a camera angle that records the exhibit as Preset 1.
Settings specified in "Schedule 1-4" (→ P.51)
G If you are not using recording triggered from an external device, leave the default priority
("Recording triggered by external device") unchanged.
G Set the camera position for recording to Preset 1.
G Insert a 5-second delay before recording to allow the camera to stabilize in the redording
position.
G Set the light to switch on when recording begins and to switch off 10 seconds later.
G The recording time frame is from 20:00 to 06:50. Since recording occurs daily, set the recording
start time from 0 to 6 and 20 to 23 every day of every month.
G Clear the "Apply the following repetition options at start time" selection.
G Delete the recorded pictures at 12:00 on the next day. In this case, delete the pictures recorded
in the morning at 12:00 on the next day, and delete the pictures recorded in the afternoon at
12:00 two days later.
Using the Still Picture Recording Function with a Predetermined Schedule
To select more than one, click
selections while holding down the
Ctrl key. (P.51)
6
121