Canon VB101 User Manual page 108

Using a Java Viewer to Distribute Videos
IGlimpse
Parameter Name
comment
hostname
show_counter
show_hostname
sleep
url
auto_connect
connect_msg
disconnect_msg
error_msg
font_size
no_connect_msg
108
Omissible
This parameter specifies the comment text string displayed as an overlay on the
Yes
applet. If this parameter is omitted, no comment is displayed.
This parameter specifies the host name displayed in the applet. This value is used as the host name
Yes
in messages displayed during connection, etc. If this parameter is omitted, no host name is displayed.
Yes This function displays the frame count as an overlay on the video image. Specify "on" or "off". The default value is "off".
This function displays the host name as an overlay on the video image. Specify "on" or "off". The
Yes
default value is "off". Note that this parameter is only valid if the "hostname" parameter is specified.
This parameter specifies the interval (in milliseconds) at which the screen is updated. If
this parameter is omitted, the screen is updated at 5-second intervals. Because the
Yes
Glimpse applet is designed to be used for displaying multiple sites as a list, this
parameter is provided as a means of reducing the processing load. Intervals between 0
and 300,000 ms (5 minutes) can be set. If 0 is specified, the interval is not adjusted.
Specify the URL of the HTTP server for applet access. Specify the IP address and
No
port number that match those specified in the codebase attribute.
Specifies whether or not connection to the camera server should be established
simultaneously with applet startup. Specify either "on" or "off". When "on", a connection
is established simultaneously with applet startup; when "off", no connection is
Yes
established when the applet starts up and the character string specified for
no_connect_msg is displayed. The connect() method is called up in order to make
connections.
Specifies the character string to be displayed while a connection to the camera
Yes
server is being established. The default is "now connecting".
Specifies the character string to be displayed when a connection to the camera
Yes
server is disconnected. The default is "disconnected".
Specifies the character string to be displayed when an attempt to connect to the camera
Yes
server has failed. The default is "can't connect".
Specifies the font size for connect_msg, disconnect_msg, error_msg, and
no_connect_msg, when these messages are displayed. The default is to depend on
Yes
the display area.
Specifies the character string to be displayed after the applet starts up, if "off" is
Yes
specified for auto_connect. The default is "no connection".
Description