20
Latest News: Firmware Version 5.30
15. Click [Next >]. You will see the Protocols page, shown below.
Select the protocol(s) currently being used on your network.
Click [Next >].
16. When you see the Finish page, click [Finish]. Click [Close], and
you will return to the Quick Setup configuration page. If you
have made any changes, click [Restart ]Server] to put the changes
into effect.
This restarts the server with the configuration changes and
returns you to the main Network Settings Wizard page (see
step 5 on page 17). When the Status indicator remains green
and the SCSI indicator is off, the server is ready for use. This
may take a few seconds to five minutes.
Return to the Quick Setup configuration page (see step 4 on
page 17) by clicking [Close].
The next procedure is used for some optional configuration.