How To Use The Documentation - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Manual

How to Use the
This section describes how to set up the server for Apple Macintosh
clients on networks using the AppleTalk Filing Protocol (AFP) over
Documentation
AppleTalk and EtherTalk. It describes the procedures for accessing
the server from a Macintosh client, for configuring the server
specifically for your network, and for setting up additional
Macintosh clients for access. This section has information that
fulfills a function similar to that served by chapters 3, 4, 5, and 6 in
the User's Guide.
If your network runs AFP over TCP/IP, then you can assign an
IP address to the server, you can configure and administer the
server using a web browser, and you can access the server's files
from each Macintosh client using a web browser as well as the
Chooser. For instructions, begin with this Latest News instead of
beginning with the procedures in the User's Guide in chapter 3,
"Setup for IP Networks and HTTP".
Reference on Server File System. Different workstations need
different points of access to the server. The network administrator
or installer, for example, needs access to configure and monitor the
server and to configure access rights. Then, the administrator may
want to set up all the clients with access to the discs but without
access to the configuration files stored on the server. Please refer to
the description of access points and the file system used on the
server, in the reference chapter 7 in the User's Guide.
Server Setup
Procedure for Administrator Access and
IP Address Setting
1. On a Macintosh, open the Chooser from the Apple menu.
2. Click the AppleShare icon.
14 Latest News: Firmware Version 5.30