Email Alert Severity; Table - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Table 4-4. email Alert Severity
Severity
Informational
Warning
Severe
Alert Description
Apply Changes
Go Back To User Configuration
Page
Printing the Page
Click the Print button in the top-right corner of the page if you want to print the
Add/Configure DRAC 4 User page.
60
Managing and Recovering a Remote System
Description
Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Informational.
Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Warning.
Select the check boxes in this column to cause the DRAC 4 to send an
alert if the corresponding event listed under Alert Description occurs
with a severity of Severe.
Lists the following events monitored by the DRAC 4. A specified alert
(either Informational, Warning, or Severe) is sent when the event is
triggered at the level of severity you selected in the check boxes to the left.
• Select All — Monitors all of the sensors available on the system.
• System Temperature Sensors — Monitors the system temperature sensors.
• System Voltage Sensors — Monitors the system voltage sensors.
• System Fan Sensors — Monitors the system fan speed in rpm.
• System Miscellaneous Sensors — Monitors other available system
sensors such as chassis intrusion.
Adds a new DRAC 4 user or commits changes made to the current
DRAC 4 user.
Opens the DRAC 4 Users page.