Cfgserialtelnet7Flsbackspace (Read/Write); Cfgnettuning; Cfgnettuningnicautoneg (Read/Write); Cfgnettuningnic100Mb (Read/Write) - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

cfgSerialTelnet7flsBackspace (Read/Write)

NOTE:
Description
When enabled, the DRAC 4 will interpret 0x7f characters as backspaces from a telnet session.
Some telnet clients send 0x7f characters when you press <Backspace>. Normally, when you
press <Backspace>, 0x08 characters are sent.
Default
0
Legal Values
0=Disabled, 1=Enabled

cfgNetTuning

The group contains parameters to tune the DRAC 4 network configuration.
One instance of the group is allowed. All objects in this group require a DRAC 4 reset before
they become active. The following subsections describe the objects in this group.

cfgNetTuningNicAutoneg (Read/Write)

NOTE:
Legal Values
1 or 0
Default
1
Description
Enables autonegotiation of physical link speed and duplex. If enabled, autonegotiation takes
priority over values set in the cfgNetTuningNic100MB and cfgNetTuningNicFullDuplex objects.

cfgNetTuningNic100MB (Read/Write)

NOTE:
Legal Values
1 or 0
204
DRAC 4 Property Database Group and Object Definitions
To modify this property, you must have Configure DRAC 4 permission.
To modify this property, you must have Configure DRAC 4 permission.
To modify this property, you must have Configure DRAC 4 permission.