Examples; Coredump; Synopsis; Table A- - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Output
This subcommand generates error output upon encountering either of the following:
• Invalid syntax, group name, object name, index, or other invalid database members
• racadm CLI transport failures
If errors are not encountered, this subcommand displays the contents of the specified configuration.

Examples

• racadm getconfig -g cfgLanNetworking — Displays all of the configuration parameters
(objects) that are contained in the group cfgLanNetworking.
• racadm config -g cfgLanNetworking -o cfgNicIpAddress 10.35.10.100 — Sets the
cfgNicIpAddress configuration parameter (object) to the value 10.35.10.110. This IP address
object is contained in the group cfgLanNetworking.
racadm getconfig -f myrac.cfg — Writes all of the configuration objects, from all of the
•
DRAC 4 group configuration parameters, in to myrac.cfg.
• racadm config -f myrac.cfg — Configures or reconfigures the DRAC 4. The myrac.cfg file
may be created from the command specified in the previous example if the DRAC 4 has a
desired configuration to be replicated. The myrac.cfg file may also be edited manually as long
as the parsing rules are followed.
NOTE:
The myrac.cfg file does not contain password information. To include this information in the
file, it must be input manually. If you want to remove password information from the myrac.cfg file,
use the -p option.
• racadm getconfig -h — Displays a list of the available configuration groups on the DRAC 4.
• racadm getconfig -u root — Displays the configuration parameters for the user named root.

coredump

NOTE:
To use this command, you must have Execute Debug Commands permission.
Table A-7 describes the coredump subcommand.
Table A-7. coredump
Subcommand
coredump

Synopsis

racadm coredump
Definition
Displays the last DRAC 4 core dump.
racadm Subcommand Man Pages
153