Getsysinfo Subcommand Options; Description; Input; Output - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Description

The getsysinfo command returns information about watchdog status, depending on the
command options.

Input

Table A-15 describes the getsysinfo subcommand options.
Table A-15. getsysinfo Subcommand Options
Option Description
-d Displays DRAC 4 information
-s Displays system information
-w Displays watchdog information
-A Eliminates the printing of headers/labels
-r Displays DRAC 4 information
If the -w option is not specified, then the other options are used as defaults.

Output

The following data element is output as a string:
Watchdog information/recovery action
Enumeration values or bitmaps are defined for these elements. When the -A (API) option is
included on the command, the enumeration/bit value of the element is listed in the output.
Otherwise, the enumeration or bit value is mapped to a string before being output.
The bulleted items listed in Table A-16 define the mapping of values to strings.
Table A-16. Watchdog Recovery Action Number Descriptions
Value
Watchdog recovery action
Description
An enumeration defines the meaning of this value:
• 0 = no-action
• 1 = hard-reset
• 2 = power-down
• 3 = power-cycle
racadm Subcommand Man Pages
161