Service Menu - Hitachi PC-ARF Technical Catalogue

5 Centralised remote controls
PSC-A32MN

5.2.4.4 Service Menu

N O T E
This switch is for the serviceman only. Therefore do not use it.
If this switch is used and the service menu is indicated on the screen, tap "Back". The screen will return to the menu.
Items
The connected indoor units are checked by the central station in the same H-LINK. This function is
Group Register
used for the group or block registration of them.
Setting of control
Set the control pattern.
patterns
This function is used for the main unit registration in the each remote control group. (The main unit
Main Unit Register is the only one (1) in the one (1) remote control group.) The control command is sent from the cen-
tral station to the main unit for the remote control group.
This function is used for registration of the sub units except the main unit in the same remote control
group. In the case of using the remote control switches or the receiver kits as follows, the sub units
are registered automatically by the central station after the main unit registration.
Sub Unit Register
•
•
Display list of reg-
Display the address of the Indoor Units which were registered in each group
isters
Optional Function Set- This function is used for setting and changing of the optional functions for the air conditioners and
ting the central stations.
Air Conditioner,
Remote Control Set or change the optional function of the air conditioner and remote control switch.
Switch Setting
Central Station
Set or change the operation mode or the color of the operation indicator or the central station.
Setting
Exception Setting of
The set group is "All Group Run (stop)", "Block run (stop)" or when"All Groups (Blocks)"operate as
"Run(Stop)", this operation is not accepted.
Run/Stop Operation
External Input/Output
There are 4 inputs and 2 outputs for external Input/Output function in the central station.
Setting
This function specifies each button to be shown/hidden.
Button Setting
This function also includes specification/setting for "one-tap operation" or "press and hold" operation.
Contact Information
This function is used for editing the contents of contact information registration.
Register
Memo Record and Browse the Test Run and Maintenance Informations
Restore Setting This function is used for restoring all the settings such as registered Groups (Blocks) and schedules.
This function is used for checking of the connected indoor unit numbers in the same H-LINK.
When this function is used, the confirmation for the keeping of registered information such as the
Checking Connection group names, schedules, etc. will be indicated.
If "OK" is tapped, the connected indoor unit numbers are updated with keeping the registered infor-
mation. If "Cancel" is tapped, the setting of the central station is all restored.
This function is used for displaying the list of alarm history that occurred in the air conditioner and
Alarm History
the controller. (Maximum 100 records)
349
TCGB0106 rev.0 - 12/2014
The remote control switches and the receiver kits which model names start from PC-A**.
The remote control switches which model names start from PC-P**.
Contents
5