Miele KWT 2662 ViS Operating And Installation Instructions page 9


The more coolant there is in a wine conditioning unit, the larger
the room should be in which it is installed. In the event of a leakage,
if the appliance is in a small room, there is the danger of a
combustible gas/air mixture building up. For every 8 g of coolant, at
3
least 1 m of room space is required. The amount of coolant in the
wine conditioning unit is stated on the data plate inside the
appliance.

Ensure that the connection data on the wine conditioning unit's
data plate (fuse rating, frequency and voltage) match the electricity
supply to prevent damage to the wine conditioning unit.
Compare this before connecting the appliance to the mains
electricity.
If in any doubt, consult a qualified electrician.

The electrical safety of this wine conditioning unit can only be
guaranteed when continuity is complete between it and an effective
earthing system. It is most important that this basic safety
requirement is present.
If in doubt, the electrical installation should be checked by a
qualified electrician.

Temporary or permanent operation with a self-sufficient or non-
mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery
systems.
The protective measures provided in the installation and in this Miele
product must also be assured in their function and operation in
isolated operation or in non-mains synchronous operation, or
replaced with equivalent measures in the installation.

The socket must be easily accessible so that the wine
conditioning unit can be quickly disconnected from the electrical
supply in case of an emergency.
Warning and Safety instructions
9