Installation
Danger of injury and damage to
the appliance due to the wine
conditioning unit tipping over.
If the anti-tip brackets are fixed too
high up, they cannot be used to
secure the wine conditioning unit.
There must not be more than 8 mm
between the anti-tip brackets and
the wine conditioning unit.
Make sure that the gap between the
wine conditioning unit's rear wall and
the installation niche does not exceed
51 mm.
Place a wooden wedge behind the
anti-tip brackets if necessary.
While holding the anti-tip brackets in
place, mark the drill holes on the rear
wall of the installation niche.
30
The accessory pack supplied
contains fastening screws for various
applications/materials.
Securing to a concrete wall
Securing to a wooden wall