Selecting further settings
Selecting the intensity of the Ambient
lighting
You can set the intensity of the
lighting
in Settings mode .
You can also choose the wine
conditioning zones in which the
should be switched on.
lighting
In Settings mode , use the
and sensors to select
lighting
and touch OK to confirm your
selection.
Use the and sensors to select
the correct setting (
Ambience 5
):
-
Ambience 1
–
Ambience 3
Weak to strong lighting in all wine
conditioning zones
-
Ambience 4
:
Only the lighting in the wine
conditioning zone in the centre is
switched on
-
:
Ambience 5
The lighting in the wine conditioning
zone in the centre is stronger than
the lighting in the top and bottom
wine conditioning zones.
Confirm your selection with OK.
Close the appliance door.
The
Ambient lighting
desired setting.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
74
Ambient
Ambient
Ambient
Ambience 1
–
:
is now set to the
Danger of injury from LED
lighting.
This lighting corresponds to risk
group RG 2. If the cover is defective,
there is a risk of eye injury.
Do not look from a close range
directly into the lighting with optical
instruments (e.g. magnifying glass or
similar).