Miele KWT 2662 ViS Operating And Installation Instructions page 32

Installation
 Affix edge protection  to the
adjacent furniture fronts.
 Insert the appliance plug connector
at the back of the wine conditioning
unit (see "Installation – Electrical
connection").
 Insert the plug  into the electrical
socket and switch on at the socket.
The electrical socket should be close
to the wine conditioning unit and
easily accessible.

Risk of damage due to electrical
overload.
If the wine conditioning unit is
electrically overloaded, this can
cause a short circuit and thus
damage your wine conditioning unit.
When you install appliances side by
side, each wine conditioning unit/
refrigeration appliance must have its
own separate electrical socket.
32
Useful tip: Secure the mains
connection cable to prevent it
becoming caught: tie a piece of string
5
to the middle of the mains connection
cable and as the wine conditioning unit
is being pushed into the niche, pull the
6
cable forwards underneath the
appliance.
 Push the wine conditioning unit
carefully into the installation niche.
 If the wine conditioning unit cannot
be pushed into the installation niche
(because the floor is uneven, for
example), unscrew the rear feet
slightly (see "Installation – Aligning
the wine conditioning unit") and slide
the appliance into the installation
niche.
 Remove the edge protection  from
the adjacent furniture fronts.