Makita RM350D Setup Manual page 27

5. Check that the Robotic Mower changes direction at the boundary wire and continues mowing.
Fig.47
► 1. Boundary wire
6. Press the "STOP" button.
The Robotic Mower stops.
7.
Turn off the power switch of the Robotic Mower and carry it to another place, and then turn on the switch. Check that the Robotic Mower oper-
ates similarly even at other boundary wire locations.
Returning the Robotic Mower to the charging station
[Top menu] > [Park] > [Stay at charging station]
This procedure is not necessary when a guide wire is installed. Proceed to [Checking guide wire installation]. Perform this procedure when using
the Robotic Mower without installing a guide wire.
Return the Robotic Mower to the charging station.
NOTE: By default, the Robotic Mower preferentially searches for signals from the guide wire and returns to the charging station according to sig-
nals of the guide wire. Even if there is not any guide wire in your work area, the Robotic Mower first continues to search for signals from the guide
wire for a preset priority search time. After the priority search time has elapsed, the Robotic Mower then researches for signals from the boundary
wire and returns to the charging station according to signals of the boundary wire. If you do not want to lay down the guide wire, we recommend
changing the priority search time for the guide wire. For details, see "Setting the active search period for the guide signal" in the instruction
manual.
1. Press the button on the control panel.
The sub menu appears.
Fig.48
2.
Select [Stay at charging station].
Press the key, and the message [Close the display cover to return to the charging station.] appears.
3. Close the battery cover.
Check that the Robotic Mower returns to the charging station.
Checking guide wire installation
Check that the guide wire is installed correctly.
1. With the power turned off, hold the grip of the Robotic Mower and move the Robotic Mower by hand so that it faces the guide wire.
Fig.49
► 1. Guide wire
1
1
27 ENGLISH
1